Great update for all S1000 and S900 pilots who are fighting with jello on lightweight cameras like BMPC or GH3/GH4.

There is now a replacing part for the lower carbon fiber plate which is located underneath the bottom centerplate.

Here’s a technical drawing of it.

s1000

 

 

 

 

 

 

 

 

 

Here’s a pic of the original short DJI plate

s1000-platte

 

 

 

 

 

The original DJI plate only supports the Arms M3, M4, M7 and M8. So thats only 4 of 8 arms. This creates a lot of vibration and rotation on to the less supported arms, which translates directly to the Gimbal.

This replacement plate is 2mm thick (for added stiffness) while the original one uses a.5mm thickness. The Aerodron version also got a matte finish which helps to reduce reflections toward the camera.
Due of the slightly added thicknes this version needs a bit longer screws. A nice set of screws plus some very cool anodized washers are included in the package.

s1000-plate1

s1000-plate2

 

 

 

 

 

 

 

 

You can get the S1000 plate directly from Aerdoron in their Webshop https://shop.aerodron.ch/en/aerodjis1000avp2cm.html

Update: 2.12.14

The S900 plate is now also available from Aerodron http://shop.aerodron.ch/en/aerodjis900avp2cm.html

s900-plate

 

 

 

 

 

 

 

 

 

 

 There is a nice clip showing where the problem is comming from.

S1000 Wobbling / vibrations explanations from Fabien Deregel on Vimeo.

DJI s1000 Vibration problem and solution from Riot Media on Vimeo.

DJI S1000 heavy Vibration while hovering from Michael Radeck on Vimeo.